VRC6 pinout
From Nesdev wiki
Legend:
--------
(s) means this pin connects to the System
(r) this only connects to the ROM
(w) this is a SRAM/WRAM connection only
AUD : these pass to the resistor network
CHR : these connect to the CHR ROM and/or fami's CHR pins
PRG : these connect to the PRG ROM and/or fami's PRG pins
WRAM : this hooks to the WRAM
CIRAM : the RAM chip which is on the fami board
.----\/----.
GND - |01 48| - +5V
AUD D1 - |02 47| - AUD D0
AUD D3 - |03 46| - AUD D2
AUD D5 - |04 45| - AUD D4
(s) PRG A12 - |05 44| - PRG A16 (r)
(s) PRG A14 - |06 43| - PRG A13 (s)
(s) M2 - |07 42| - PRG A17 (r)
(r) PRG A14 - |08 41| - PRG A15 (r)
*1 (s) PRG A1 - |09 40| - PRG A13 (r)
*1 (s) PRG A0 - |10 39| - PRG D7 (s)
(s) PRG D0 - |11 38| - PRG D6 (s)
(s) PRG D1 - |12 37| - PRG D5 (s)
(s) PRG D2 - |13 36| - PRG D4 (s)
(r) PRG /CE - |14 35| - PRG D3 (s)
(s) R/W - |15 34| - PRG /CE (s)
*2 (w) WRAM /CE - |16 33| - /IRQ (s)
(r) CHR /CE - |17 32| - CIRAM /CE (s)
(s) CHR /RD - |18 31| - CHR A10 (s)
(s) CHR /A13 - |19 30| - CHR A11 (s)
(r) CHR A16 - |20 29| - CHR A12 (s)
(r) CHR A15 - |21 28| - CHR A17 (r)
(r) CHR A12 - |22 27| - CHR A14 (r)
(r) CHR A11 - |23 26| - CHR A13 (r)
GND - |24 25| - CHR A10 (r)
| |
`----------'
- 1: On some VRCVI carts, these are reversed. This affects some registers.
- 2: This passes through a small pulse shaping network consisting of a resistor, diode, and cap.
