# Random number generator

While truly random numbers are difficult to create with a deterministic computer, a **pseudorandom number generator**, or **PRNG**, may be used instead, which is technically deterministic, but designed so that the output should appear consistently uncorrelated. There are a wide variety of suitable algorithms.

Typically a starting "seed" is supplied by the program to begin the sequence generated by a PRNG. By finding some way^{[1]} of gathering a suitably unpredictable starting seed, (e.g. counting the time until the user presses a button) the program can start at a different part of the sequence each time it is run, ensuring the user does not have the same experience twice.

## Contents

## Linear feedback shift register

The linear feedback shift register is commonly used as a PRNG on systems like the 6502 which have no hardware multiply capabilities. This rotates a series of bits (the *shift register*), with the bit coming off the end of the series *feeding back* into the register as an exclusive-OR operation. By choosing the feedback bits carefully, this can create a sequence that fills the register with every possible value (except 0), allowing relatively long random number sequences using only bitwise operations.

This example^{[2]} is only 16 bits wide, but the sequence length of an LSFR can be doubled with each bit.

If you need to generate large batches of random numbers at once, a 24 or 32-bit LFSR is recommended. Wider LFSRs are still very practical, and produce extremely long random number sequences. Narrower LFSRs are also possible, but not generally recommended due to their short, repetitive sequences.

See Linear feedback shift register (advanced) for further commentary on this code, and various alternatives with other LFSR widths and properties (efficiency, quality, etc.).

### Simple

; prng ; ; Returns a random 8-bit number in A (0-255), clobbers Y (0). ; ; Requires a 2-byte value on the zero page called "seed". ; Initialize seed to any value except 0 before the first call to prng. ; (A seed value of 0 will cause prng to always return 0.) ; ; This is a 16-bit Galois linear feedback shift register with polynomial $002D. ; The sequence of numbers it generates will repeat after 65535 calls. ; ; Execution time is an average of 125 cycles (excluding jsr and rts) .zeropage seed: .res 2 ; initialize 16-bit seed to any value except 0 .code prng: ldy #8 ; iteration count (generates 8 bits) lda seed+0 : asl ; shift the register rol seed+1 bcc :+ eor #$39 ; apply XOR feedback whenever a 1 bit is shifted out : dey bne :-- sta seed+0 cmp #0 ; reload flags rts

19 bytes, 133-141 cycles per call (average 137).

### Overlapped

This is equivalent to the simple version above, but performs 8 iterations at once in a complex overlapped operation.

; Returns a random 8-bit number in A (0-255), clobbers Y (unknown). prng: lda seed+1 tay ; store copy of high byte ; compute seed+1 ($39>>1 = %11100) lsr ; shift to consume zeroes on left... lsr lsr sta seed+1 ; now recreate the remaining bits in reverse order... %111 lsr eor seed+1 lsr eor seed+1 eor seed+0 ; recombine with original low byte sta seed+1 ; compute seed+0 ($39 = %111001) tya ; original high byte sta seed+0 asl eor seed+0 asl eor seed+0 asl asl asl eor seed+0 sta seed+0 rts

35 bytes, 69 cycles.

## See also

## References

## External references

- CC65's rand.s (a good quality 32-bit LCG, forum commentary)
- nesdev forum: Which randomizer to use?
- nesdev forum: need assistance with random number generator
- nesdev forum: CRC routines as PRNGs
- Codebase64.org PRNG code examples