RP2C33 pinout

From Nesdev wiki
Jump to: navigation, search

Family Computer Disk System ASIC RP2C33 or RP2C33A: 64-pin shrink DIP (FDS files)

                 .---\/---.
 (Rf) /ROMSEL -> | 01  64 | -- +5V
 (Rf) CPU A14 -> | 02  63 | <- XTAL2
 (Rf) CPU A13 -> | 03  62 | -> XTAL1
  (f) CPU A12 -> | 04  61 | <- ? (gnd)
  (f) CPU A11 -> | 05  60 | -> /RAS (r)
  (f) CPU A10 -> | 06  59 | -> /CAS1 (r)
   (f) CPU A9 -> | 07  58 | -> /CAS0 (r)
   (f) CPU A8 -> | 08  57 | <- R/W (rf)
(r) PRG A6/13 <- | 09  56 | <- M2 (Rf)
(r) PRG A5/12 <- | 10  55 | -> /IRQ (f)
(r) PRG A4/11 <- | 11  54 | -> Audio (f)
(r) PRG A3/10 <- | 12  53 | <- ? (gnd)
 (r) PRG A2/9 <- | 13  52 | -> SER OUT
 (r) PRG A1/8 <- | 14  51 | <- SER IN
   (r) PRG A0 <- | 15  50 | -> $4025W.2 (Disk 1=Read, 0=Write)
  (rf) CPU A7 -> | 16  49 | -> $4025W.1 (1=Reset transfer timing)
   (f) CPU A6 -> | 17  48 | -> $4025W.0 (1=Turn on motor)
   (f) CPU A5 -> | 18  47 | <- $4032R.2 (1=Write protected)
   (f) CPU A4 -> | 19  46 | <- $4032R.1 (1=Disk not ready)
   (f) CPU A3 -> | 20  45 | <- $4032R.0 (1=Disk missing)
   (f) CPU A2 -> | 21  44 | <> EXT0
   (f) CPU A1 -> | 22  43 | <> EXT1
   (f) CPU A0 -> | 23  42 | <> EXT2
            ? <- | 24  41 | <> EXT3
  (rf) CPU D0 <> | 25  40 | <> EXT4
  (rf) CPU D1 <> | 26  39 | <> EXT5
  (rf) CPU D2 <> | 27  38 | <> EXT6
  (rf) CPU D3 <> | 28  37 | <> EXT7/BATT
  (rf) CPU D4 <> | 29  36 | <- PPU A10 (f)
  (rf) CPU D5 <> | 30  35 | <- PPU A11 (f)
  (rf) CPU D6 <> | 31  34 | -> CIRAM A10 (f)
          GND -- | 32  33 | <> CPU D7 (rf)
                 '--------'
R - connects to LH2833 DRAM in later PCB revisions
r - connects to DRAM (all revisions)
f - connects to Famicom

Notes:

  • PRG address bus is multiplexed, as is typical for DRAMs.
  • EXT port can be written via $4026 and read via $4033

Transcribed from http://green.ap.teacup.com/junker/119.html